Hand Tools and Power Tools
Zebra Technologies Corporation ZEBRA TECHNOLOGIES INTERNATIONAL LLC
NC3989650 POLYPRO 3000T 4IN X 6IN 4/CS
Grainger 90 Elbow SS 2 in Socket x Push Fit
The Blucher 90° Sweep Elbow is a stainless steel elbow fitting with a 90 degree sweep. It has a 2 inch nominal pipe size and is made from 304 stainless steel for corrosion resistance. The elbow has a smooth interior surface and is welded construction. It can withstand pressures up to 300 psi at 70°F. The elbow is ideal for use in sanitary drainage, waste, and vent piping applications.
Grainger Aircraft Black Oxide Drill Bit 1/8 x 6
The DEWALT Aircraft Black Oxide Alloy Steel Hand Tap, Taper, Plug Chamfer, 1/4"-20 Threads is a high speed steel hand tap with a black oxide finish for corrosion resistance. It has a tapered chamfer point to start holes easily. The tap size is 1/4"-20 threads per inch. The overall length is 4-1/2". It can be used for hand tapping holes in steel, cast iron, aluminum, and other metals. The black oxide coating provides lubricity. Made in the USA by DEWALT, this is a quality tap for hand tapping threaded holes.
Grainger Sq. End Mill Single End Carb 3.00mm
The Grainger 14G063 is a Westward brand 1/4-inch drive socket set. It contains 15 SAE sockets ranging from 4mm to 14mm and 15 metric sockets ranging from 5/32 inch to 9/16 inch. The chrome vanadium sockets have a matte finish and feature laser etched size markings. This 30 piece socket set comes packed in a molded case for storage and portability. The case has a hinged lid and socket rail to keep the sockets organized.
Grainger Hex Long Nipple 316 SS 3/4 in MNPT
The Parker Hex Long Nipple is a 316 stainless steel pipe fitting with male NPT threads on both ends. It has a hexagonal body for wrench tightening and is made from 316 stainless steel for corrosion resistance. This nipple has a pressure rating of 6000 psi at 100°F and is available in sizes ranging from 1/8" to 2" NPT in lengths from 1" to 24". It can be used to extend and connect stainless steel pipe.
Grainger Sq. End Mill Single End Carb 3.00mm
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has four flutes and a right-hand spiral. The overall length is 3 inches and the shank diameter is 0.5 inches. This end mill is uncoated and made in the USA. It can be used for a variety of materials including steel, stainless steel, cast iron, aluminum, copper, brass, bronze, plastic, and wood. The square end allows milling of 90 degree shoulders and corners in one pass.
Grainger Sq. End Mill Single End Carb 5/64
The Grainger Approved Square End Mill Single End is a high-speed steel end mill with a square end for milling slots, keyways, and pockets. It has a 1/2" shank diameter, a 1-1/2" overall length, and a 1/2" cutter diameter. The number of flutes is 2. This end mill is uncoated and made in the USA. The primary applications are slotting, side milling, and profiling. It can machine low carbon steels at surface speeds up to 120 SFM.
Grainger Brush 1.5 Angle Sash PET/Nylon 2 7/16 L
The Purdy 14C530 Paint Brush Angle Sash Brush is a 2-1/2 inch angle sash brush made with a blend of polyester and nylon bristles. It has a chisel edge for cutting crisp paint lines and can be used for oil-based or latex paints. The brush has a varnished wood handle and nickel-plated steel ferrule. It is designed for painting windows, trim, and other detail work. This brush is made in the USA.